DIY Beer Bottle Lamps

DIY Beer Bottle Lamps

DIY Beer Bottle Lamps
You need:
  • Some empty beer bottles
  • A drill
  • 1/2 a drill bit
  • Masking tape
  • Christmas Lights (with a plug on one end)
How to make it:
1. Clean your beer bottles and remove any labels if you would like them off
2. Place a piece of masking tape on the bottle to prevent the drill bit from slipping. Drill a hole where you want the cord to come out off.
3. Once you have finalised where you want the hole you can make your hole. Try not to apply too much pressure or you could break the glass. This is quite a long process to get the hole right, it took us half an hour!
4. Once your hole is drilled rinse the glass shavings out of your bottle.
5. Place the Christmas lights into the hole you have drilled and make sure the cord is at the end of the hole.
6. YAY! New lights!
news_offers